Canon DIGITAL IXUS860IS User Manual

* The preview only show first 10 pages of manuals. Please download to view the full documents.

Loading preview... Please wait.

Manuals information


Report / DMCA this file

Manuals Content

IIIIIIIIIII CDI-E366

Canon 7_werShot _o

r

DIG

-_D870 IT_.L

Camera

o

m

3 q) C

Q (D



IS

(_LPH

User

DIG

IT_,L

D(US B6015

Guide

Workflow

and

Reference

The following guides flowchart below.

are available.

Refer

Guides

to them

as necessary

according

to the

Guide Direct Print User

_._

_

GuideS°ftware Starter ZoomBrowser ImageBrowser Software User • PDF manuals on the Canon

EX/ Guide available website.

http:llweb.canonjpllmaginglinformation-e.html



I 1

Checking

the

Package

Contents

The following items are included in the package. If something is missing, please contact the retail outlet at which you purchased the product.

r

"h _)

Camera

_)

Memory

AV Cable

O

Battery Pack NB-5L (with Terminal Cover)

Card (32MB)

_

Interface

AVC-DC300

_

Wrist

Cable

O

Battery Charger CB-2LX/CB-2LXE

IFC-4OOPCU

Strap WS-DC2

O

Canon Digital Camera Solution Disk

_)

Warranty

You may not be able to achieve the full performance with the included memory card.

Card

of this camera

You can use SD memory cards, SDHC (SD High _'_

Capacity) memory cards, MultiMediaCards, MMCplus cards and HC MMCptus cards in this camera. These cards are collectively referred to as memory cards in this guide.



Table of Contents

Various Shooting

Methods

Shooting in Modes for Special Conditions .............. Shooting in Manual Mode .......................... Continuous Shooting ........................... Setting the Red-Eye Reduction Function ............... Setting the Slow Synchro Function ................... _m Movie Shooting ............................... Shooting Panoramic Images (Stitch Assist) ............. Checking the Focus and Peoples' Expressions (Focus Check) .................................... Switching between Focusing Modes .................. Shooting Hard-to-Focus Subjects (Focus Lock, AF Lock). Locking the Exposure Setting (AE Lock) .............. Locking the Flash Exposure Setting (FE Lock) ......... Adjusting the ISO Speed ...................... _,,v Reducing the Effects of Camera Shake (Auto ISO Shift)... Adjusting the Exposure Compensation ............... Switching between Metering Modes ................. Setting the Shutter Speed (Long Shutter Mode) ........ Adjusting the Tone (White Balance) ................. Shooting in a My Colors Mode ...................... Changing Colors ................................ Categorizing Images Automatically (Auto Category) ..... _,=M Registering Settings to the Print/Share Button ..... Setting the Display Overlays .......................

I

3

81 81 84 85 86 87 88 93 95 97 100 102 103 104 105 107 108 109 111 114 116 121 122 124

I 4

I

Table of Contents

Setting the Auto Rotate Function .................... Creating an Image Destination (Folder) ............... Resetting the File Number ......................... Playback/Erasing Q, Magnifying Images ............................ _" Viewing Images in Sets of Nine (Index Playback) .... Checking the Focus and Peoples' Expressions (Focus Check display) ............................ Jumping to Images ............................ Organizing Images by Category (My Category) ......... Viewing Movies (Operating the Movie Control Panel) .... Editing Movies .................................. Rotating Images in the Display ..................... Playback with Transition Effects .................... Automated Playback (Slide Shows) .................. Red-Eye Correction Function ....................... Adding Effects with the My Colors Function ........... Resizing Images ................................ Attaching Sound Memos to Images .................. Sound-Only Recording (Sound Recorder) ............. Protecting Images ............................... Erasing Images ................................. Registering Functions to the Playback Button ..........



125 126 128 130 130 131 132 134 136 140 142 144 145 146 151 155 158 160 162 164 168 172

Table of Contents

Symbol

Conventions

in this

Guide - Mode switch

_Co_u_g

the

P_stc_d

Mode

I

position

i_m

,vailable

shooting

modes

These modes are available

Explanations

0

cTahimSemraarkdepenra°_eeSni'Ssues that mayaffe!t

_]

the basic operating procedures. This mark denotes additional topics that complement

in this guide

at t me of purchase.

are based

on the camera's

the

default

settings

5

61 Please Test

Read

Shots

Before you try to photograph important subjects, we highly recommend that you shoot several trial images to confirm that the camera is operating and being operated correctly. Please note that Canon inc., its subsidiaries and affiliates, and its distributors are not liable for any consequential damages arising from any malfunction of a camera or accessory, including memory cards, that results in the failure of an image to be recorded or to be recorded in a way that is machine readable. Warning

Against

Copyright

Infringement

Please note that Canon digital cameras are intended for personal use and should never be used in a manner that infringes upon or contravenes international or domestic copyright laws and regulations. Please be advised that in certain cases the copying of images from performances, exhibitions, or commercial properties by means of a camera or other device may contravene copyright or other legal rights even if the image was shot for personal use. Warranty

Limitations

This camera's warranty is only effective in the country of sale. If a problem arises while the camera is in use abroad, please convey it back to the country of sale before proceeding with a warranty claim to a Canon Customer Supporf Help Desk. For Canon Customer Support contacts, please see the customer support list supplied with your camera.

Video

Format

Please set the camera's video signal format to the one used in your region before using it with a TV monitor. Language

Setting

Please see Setting the Display Language



(p. 13) to change the language

setting.

Various

Shooting

Methods

I 81

I You can also use the touch control dial to select shooting modes or FUNC. menu options. See p. 41.

_ Shooting

in Modes []

for Special

See Functions

Available

You can shoot with the most appropriate

Conditions

in Each Shooting

Mode

[] (p. 238).

settings for the scene.

Se,eciashooti",mode: _1. Set the mode switch to $CN. 2. Press the (_) button. 3. Use the ÷ or •

button to select []

and the 4" or 4" button to select a mode.

[]

_ ,,

Portrait

Produces a soft effect when photographing people.

[]

Night Snapshot

Allows you to take snapshots of people against twilight or night backgrounds by reducing the effects of camera shake even without using a tripod.



82I Various

Shooting

Methods

[]

Kids&Pets

Allows you to capture subjects that move around, such as children and pets, without missing photo opportunities.

[]

Indoor

Prevents camera shake and maintains the subject's true color when shooting under fluorescent or tungsten lighting.

[]

Foliage

Shoots trees and leaves--such as new growth, autumn leaves or blossoms--in vivid colors.

[]

Snow

Shoots without a blue tinge and without making people appear dark against a snowy background.

[]

Beach

Shoots without making people appear dark near water or sand where reflected sunlight is strong.

[]

Fireworks

Captures fireworks in the sky sharply and at optimal exposure.



Various

[]

Shooting

Methods

I 83

Aquarium

Selects the optimal ISO speed, white balance and color balance to capture fish and other items in an indoor aquarium.

[]

Underwater

Appropriate for shooting images with Waterproof Case WP-DC17 (sold separately). This mode uses an optimal white balance setting to reduce bluish tones and record images with a natural hue.

• The shutter speed is slow in [] mode. Always use a tripod to avoid camera shake. • In _:'_] [] [] ['_--'Jor[] mode the lSO speed may increase and cause noise in the image depending on the scene being shot.

_]

underwater. You are also recommended to use this case for Install the camera in Waterproof Case WP-DC17 to shoot shooting in rainy conditions, at the beach or on the ski slopes.



84I Various

Shooting

Methods

_ Shooting

in Manual []See

Functions

Mode Available

[] in Each

Shooting

Mode

(p. 238).

Allows you to select settings yourself, such as the exposure com )ensation, white balance or my colors.

..... 1 Seiectmanual moUe. 1. Set the mode switch to O. A

2. Press the _-_

button.

3. Use the 4, or _1, button to select [] and choose [] with the ÷ or ._ button. 4. Press the _



button.

.............................

Various

I Continuous

Shooting

Methods

Shooting []

See Functions

I 85

[][] Available

in Each Shooting

Mode

(p. 238).

tn this mode, the camera shoots continuously while the shutter button is held down. If you use the recommended memory card*, you can shoot continuously (smooth continuous shooting) at a set shooting interval until the memory card is full (p. 219). *Recommended Memory Card: Super high-speed SDC-512MSH memory card (sold separately) to which low-level formatting (p. 65) is conducted immediately before shooting. This reflects standard shooting criteria established by Canon. Actual results may vary according to the subject and shooting conditions. Even if continuous shooting suddenly stops, the memory card may not be full.

To Cancel Continuous Shooting Follow step 1 to display il

I_]

of the camerashots fills. lengthens when the built-in • memory The interval between • If the flash is used, the interval between shots lengthens because the flash must charge.



86I Various i Setting

Shooting

Methods

the Red-Eye Reduction []See

Functions

Available

This function reduces the red appearance and light is reflected back.

1. Press

the _

2. In the [r'_]

Function

in Each

Shooting

[_[] Mode

(p. 238).

of eyes when the flash fires

button. menu, use the 4" or _1,

button to select [Red-Eye].

1. Use the ÷ or ,_ button to select

[Onlor [Off]. 2. Press

_]

the _

button.

when the Red-Eye option set to orange [On]. before the flash fires he red-eye reduction lampis lights



Various

I Setting

the

Slow []

Synchro

See Functions

Available

Shooting

Methods

Function in Each Shooting

I 87

[] Mode

(p. 238).

You can shoot with the flash at slow shutter speeds. You can limit the extent to which only the background darkens with flash photography while shooting night scenes or under indoor lighting.

_]

Synchro] is set [On]. tf this occurs, you are recommended Please note thattocamera shake becomes a factor when [Stowto fix the camera to a tripod to shoot in this mode.



88

I Various

Shooting

i Movie

Methods

Shooting []See

[] Functions

Available

in Each

Shooting

Mode

(p. 238).

The following movie modes are available. For information on the recording pixets and frame rate in each mode, refer to Changing Recording Pixels (p. 91 ). * The recording (p. 220).

[]

time will vary according

to the capacity

of the

memory

card you use

Standard [You can select the recording pixels and record until the memory card is __ul__ed I • Maximum Size: 4 GB 2/movie

[]

while shooting in this mode (p. 67).

Compact I Since there are few recording pixels and also the data size is small_ Ithis mode is convenient for sending movies as e-mail attachments or _hen the memory card capacity is low. _- Maximum Clip Length: 3 minutes

[]

Color Accent

[]

ColorSwap

You can have only the specified color remain and change all others into black and white, or change a specified color into a different color (pp. 116, 118). As with the Standard mode, you can also select the /recording pixels and frame rate and record until the memory card is _ull. 1

-

____

I ° Maximum Size: 4 GB*/movie []

Time Lapse Select a shooting interval (1 or 2 sec.) to have a single frame shot at that interval. When played back, two hours worth of recorded frames is compressed to 8 minutes (1-sec. interval) or 4 minutes (2-sec. interval). You can record events from a fixed perspective, such as the spectacle of a flower budding over time, or view changing elements in _. short period. Sound cannot be recorded in this mode. I • Maximum recording session: 2 hours.

"1 When a super high-speed memory card is used: SDC-512MSH is recommended. *2 Even if the clip size has not reached 4 GB, recording will stop at the moment the clip length reaches 1 hour. Depending memory card, recording may stop data volume has reached 4 GB.



on the volume and data writing speed of the before reaching 1 hour or before the recorded

Various Shooting Methods I 89

• You are recommended to use a memory card that has been formatted in your camera to shoot movies (p. 65). The memory card supplied with the camera may be used without further formatting.



I 90

i Various

Shooting

Methods

• Be careful of the following while recording. - Do not touch the microphone (p. 38). - Do not press any buttons other than the shutter button. The sound that buttons make will be recorded in the movie. - The camera will automatically adjust the exposure and white balance to suit the shooting conditions during recording. Please note, however, that the sounds made by the camera automatically adjusting the exposure may also be recorded. • The focus and optical zoom settings remain fixed for subsequent frames at the values selected for the first frame.

_]

is effective and the and beach when the • shift. BeforeThis recording, you on canskisetslopes the AE lock exposure contrast is too strong between the subject and background or where there are both light and dark areas in the scene and it is desirable to adjust the exposure. 1. Press the I_ button.The exposure will lock (AE lock) and the exposure shift bar will appear in the LCD monitor. 2. Use the ÷ or ,I, button to adjust the exposure.Press the [] button again to release the setting. Also, the setting will be canceled if you press the MENU button or change the white balance, My Colors or shooting mode settings. • If you register the I_ function with the _,_, button, you can start shooting a movie simply by pressing the _,,,v button even if the mode switch is setto O or Still (p. 122). • QuickTime is required to play back movies (Data type: AVI/ Compression method: Motion JPEG) on a computer (Only Windows 2000).



Various

Changing

Recording

Shooting

Methods

I 91

Pixels

You can change the recording pixels when the movie mode is set to [] (Standard), [] (Color Accent)or [] (Color Swap). Select

the

number

1. Press the @

of recording

pixels,

button.

2. Use the ÷ or 4, button to select []

and the ÷ or "l, button to

change the option. 3. Press the _#_ button.

Recording

Pixels

and

Frame

Rates

Frame rates indicate the number of frames recorded or played back each second. The higher the frame rate, the smoother the appearance of motion. []

Standard

[].1

640 x 480 pixels, 30 frames/sec.

[]

Color Accent

_J.2

640 x 480 pixels, 30 frames/sec. LP

[]

Color Swap

[]

320 x 240 pixels, 30 frames/sec.

[]

Compact

[]

160 x 120 pixels, 15 frames/sec.

[]

Time Lapse

[].3

640 x 480 pixels, 15 frames/sec.

"1 Default setting. *2 To give priodty to recording length over quality, select the option (Long Play). For the same file size, you can record approximately

displaying [LP] twice the

length. *3 Frame rate when the shooting interval is [] sec.)., []: 0.5 fi-ame/sec. (shooting interval: back

_]

(_or

[]):

: 1 fi-ame/sec.(shooting interval: 1 2sec.). Frame rate when playing

15 frames/sec.

• See Memory Image Data Cards Sizes and(Estimated) Estimated Capacities (p. 221). (p. 219).



92I Various

Shooting

Methods

Changing the Shooting Interval Select

a shooting

1. Press the Q

([] Time Lapse)

interval.

button.

2. Use the 4_ or 4- button to select []

and the 4, button to change

the option. 3. Press the _

button. Recordable

Duration

• The indicator will blink green while the camera is recording.

• You are recommended to use a fully charged battery or an AC adapter since the recording period may be lengthy. • The power saving setting (p. 45) will determine whether or not the LCD monitor shuts off. The LCD monitor will turn on if something other than the power button or shutter button is operated. • The LCD monitor displays the elapsed time from the start of recording to the end in playback mode, but the actual playback time is shorter than the displayed time.



Various

Shooting

Methods

I Shooting Panoramic Images (Stitch Assist) []

See Functions

Available

in Each Shooting

Mode

I 93

[] (p. 238).

Stitch Assist can be used to shoot overlapping images that can later be merged (stitched) to create one panoramic image on a computer.

The overlapping seams of several adjacent images can be joined into a single

panoramic

image.



94

Various

Shooting

a portion

Methods

of the

first

and

shoot.

• You can press the 4" or 4" button to return to the previously recorded image to retake the shot. • Minor discrepancies in the overlapping portions can be corrected when the images are stitched together.

A sequence may contain up to 26 images.

e

ou cannot display the image s On a _ when shooting jn Stitch Assist mode. • The settings for the first image are applied to the second image onward.

_]

images on a computer. se PhotoStitch, a supplied so_Lware program, to merge the



I Various

_ Checking Focus Expressions the (Focus []

See Functions

Shooting

Methods

and Peoples' Check) Available

in Each Shooting

_ 95

[_[_ Mode

(p. 238).

You can check the focus in recorded images, tt is also easy to check peoples' expressions and took for closed eyes because a frame the size of the face displays in Face Detect mode. You are recommended to set [Review Info] in the [r"_] menu to [Hold] beforehand.

1. Press the _

button.

2. In the [r'_l] menu, use the ÷ or ÷ button to select [Review tnfo].

Accept

the

setting,

1. Use the ÷ or "I_ button to select [Focus Check]. 2. Press the _



button.

96

Various

Shooting

Methods

• The recorded image displays.

RecordedImage

Orange

frame

contents

• The frame displays as follows. Frame Color Orange White

Content Displays the area of the image shown at the bottom right D sp ays at the foca pont (AF frame)

• The orange frame can be shown at a different magnification, moved or switched to a different frame (p. 133). To Cancel Checking the Focus Press the shutter button halfway.

_]

button not right deleteof the • When the will bottom the image. image is enlarged, pressing the • You can also check the focus in playback mode (p. 132).



Various Shooting Methods I 97 I Switching

between []

See Functions

Focusing Available

Modes

in Each Shooting

[]_ Mode

(p. 238).

The AF frame indicates the area of the composition on which the camera focuses. You can set the AF frame in the following ways. F n L_ J

(No frame)

Face Detect

You can have the camera automatically detect the position of a face and use this data to set the focus and exposure* while shooting. * Only inevaluative metedng mode (p. 48).

AiAF

The camera detects the subject and highlights the AF frames, from 9 available points, that it will use to determine the focus.

Center

The camera focuses using the center AF frame. This is convenient for making sure the focus is exactly where you want it. You can change the size of the AF frame (p. 99).



I 98

_ Various

_]

Face

Shooting

Methods

pressed halfway. he AF frame appears as follows when the shutter button is - Green Focus is achieved - Yellow

Focusing difficulty (AF frame set to [Center])

- No AF frame

Focusing Difficulty (AF frame set to [Face Detect] or [AiAF])

Detect

Feature

• Maximum of three Face frames will be displayed at the position of the face the camera recognizes. At this point, the frame the camera judges to be the main subject appears in white while the others appear in gray. When the shutter button is pressed halfway, up to 9 green AF frames may appear. • The camera will shoot using [AiAF] not the [Face Detect] function if a white frame fails to appear and only gray frames display, or if a face is not detected. • The camera may mistakenly identify non-human subjects as a face. • In certain cases, faces may not be detected. Examples: - If faces are at the edge of the screen, or appear extremety smatl, large, dark or bright, relative to the overall composition. - Faces turned to the side or at a diagonal, or faces with a portion hidden.



Various

Changing

the

AF Frame

Shooting

Methods

I 99

Size

When the [AF Frame] is set to [Center], the AF frame can be resized to correspond to the subject. Select [Small] to constrict the focal frame to suit a small subject or to focus on a particular area of a subject. Select

[AF

Frame

1. Press the _ 2. In the [r'_]

Size].

button. menu, use the 4, or

41,button to select [AF Frame Size].

,2

Accept

the

setting.

1. Use the 4- or ,_ button to select [Normal] or [Small]. 2. Press the _ button.

_]

orhe digital tete-converter used. setting is configured is to [Normal] when the digital zoom



I 100

_ Various

Shooting

Methods

Shooting Hard-to-Focus (Focus Lock, AF Lock) []See

Functions

Subjects Available

[_[_[]

in Each

Shooting

Mode

(p. 238).

It may be difficult to focus on the following types of subjects. • Subjects with extremely low contrast to the surroundings • Scenes with a mixture of near and far subjects • Subjects with extremely bright objects at the center of the composition • Subjects that are moving quickly • Subjects through glass: Try to shoot as close to the glass as possible to reduce the chances of light reflecting back off the glass.

Shooting

with

the Focus

Lock

focal distance as the main in the AF frame•

subject

is centered

fOCUS• 3

Keep you ter

the

shutter

recompose button



all

button the

the

pressed

image

way

and

to shoot

halfway press the

the image•

while shut-

I Various

Shooting

with

Shooting

Methods

_ 101

the AF Lock

The AF lock can be used in the r_,

[_,

[],

[]

or []

mode.

To Release the AF Lock Press the _/Ji, button.

_]

setting with [AF Frame] [Center] 97)using makesthe LCD • monitor, When shooting the focusto lock or AF(p.lock shooting easier since the camera focuses using the center AF frame only. • The AF lock is convenient because you can let go of the shutter button to compose the image. Moreover, the AF lock is still effective af[er the picture is taken, allowing you to capture a second image with the same focus. • The AF frame will not appear in movie mode.



I 1021

Various

Shooting

Methods

i Locking (AS Lock) the

Exposure []See

Functions

Setting Available

in Each

[] Shooting

Mode

(p. 238).

You can set the exposure and focus separately. This is effective when the contrast is too strong between the subject and background or when a subject is backlit.

,2

Aim

the

wish

to

Press

camera

at the

lock

exposure.

the

the

shutter

button

subject

halfway

on which

and

you

press

the .......

[F_ button. • The []

icon will display.

desired

and

press

the

shutter

button

fully.

To Release the AE Lock Press the _ button.

_]

•• You can use the AE FE lock lock can whenalso using the flash. In movie mode, be set/canceled



(p. 90).

I Various

_ Locking (FE Lock) the

Flash []

Exposure

See Functions

Available

Shooting

Methods

Setting

in Each Shooting

Mode

[] (p. 238).

You can lock the flash exposure so that the exposure settings are correctly set regardless of the composition of your subject.

To Release the AE Lock Press the _ button.



_ 103

1041

i_

Various

Shooting

Methods

Adjusting

the []See

ISO

Functions

Speed Available

in Each

[] Shooting

Mode

(p. 238).

Raise the ISO speed to use a fast shutter speed when you wish to reduce the effects of camera shake or avoid blurry subjects, or to turn the flash off when shooting in a dark area.

1. Use the ÷ or _1, button to change the ISO speed. • You can advance to the next option each time you press the button. • Selecting [] (Auto) puts priority on image quality in setting the optimal ISO speed for the light level when shooting. Since the tSO speed setting will automatically be raised in dark places, the camera will select a faster shutter speed and reduce the chances of camera shake. • Selecting [] (High ISO Auto)* sets a higher sensitivity than for []. As the shutter speed becomes even faster, camera shake and blurred photos caused by subject movement will be reduced even more than when shooting the same scene in []. * Noise may increase in the captured image compared to []. • When in [] selected. • []

_]

and []

(Auto) shooting mode, only []

or []

can be

cannot be selected in Long Shutter mode (p. 109).

you shootapplies at a high tSOreduction speed. • processing The camera when automatically noise • If the camera is set at [] or [], the ISO speed automatically set by the camera will be displayed when pressing shutter button halfway or in playback information.



I Various

_ Reducing (Auto ISO the Shift)Effects []

See Functions

Shooting

of Camera Available

in Each Shooting

Methods

_ 105

Shake [] Mode

(p. 238).

If the camera shake warning icon ([]) displays while shooting, you can raise the ISO speed and record at a shutter speed that compensates for camera shake. Off Allows you to check the ISO speed and the shutter speed _,_,_ button On

setting in the LCD monitor before and after the change. Automatically sets the optimal ISO speed to compensate Ifor camera shake.

e

uto ISO Shi_ does not work with [], _]_, [], or in Long Shutter mode or with the flash. • Depending on the shooting conditions the camera shake warning icon ([]) may no t disappear even when the ISO speed is e!evated



I 1061

Various

• Shoot

Shooting

with

Methods

[On]

Selected

halfway, • The camera selects the optimal speed according to light levels to compensate for camera shake.

• Shoot

with

[_,,v

button]

Selected

J halfway, • If [] appears, the _ light blue.

button

down

button will

halfway,

• The post-change ISO Speed will display. • With the shutter button pressed halfway, pressing the _,_,_ button again returns the ISO speed to the original setting. • If you set the AE Lock (p. 102) after raising the ISO speed, the tSO 2:0 speed will not retum to the previous setting, even if you release the shutter button.



Various

I Adjusting

the Exposure []

See Functions

Shooting

Methods

Compensation Available

in Each Shooting

1107

[_[_ Mode

(p. 238).

Adjust the exposure compensation to a positive value to avoid making the subject too dark when it is backlit or shot against a bright background. Adjust the exposure compensation to a negative value to avoid making the subject too bright in night shots or when shot against a dark background.

To Cancel the Exposure Compensation Restore the compensation value to [0].

_]

In movie mode, the exposure



shift can be set/canceled

! (p. 90).

108

1 Various

Shooting

Methods

i Switching

between []See

Functions

Metering Available

in Each

Modes Shooting

Mode

[] (p. 238).

[]

Evaluative

Appropriate for standard shooting conditions, including backlit scenes. The camera divides images into several zones for metering, it evaluates complex lighting conditions, such as the position of the subject, the brightness, the direct light, and the backlighting, and adjusts the settings to the correct exposure for the main subject.

[]

Center Weighted Avg.

Averages the light metered from the entire frame, but gives greater weight to the subject matter at the center. Meters the area within the spot AE point at the

[]

Spot

Change

center of the LCD monitor. Use this setting when you want to set the exposure on the subject in the center of the monitor. the

1. Press the _

metering

method.

button.

2. Use the ,IF or _1,button to select [] and the ÷ or "I, button to change the option. 3. Press the _'_ button.



I Various

_ Setting

the

Shutter (Long Speed Shutter []

See Functions

Available

Shooting

Methods

_ 109

Mode)[]

in Each Shooting

Mode

(p. 238).

You can set the shutter speed to a slow setting to make dark subjects appear brighter.

• The brightness of the image appearing on the LCD monitor and the recorded image may differ. • ]-he nature of CCD image sensors is such that noise in the recorded image increases at long shutter speeds. This camera, however, applies special processing to images shot at shutter speeds of 1.3 seconds or slower to eliminate the noise, thereby producing high-quality images. A certain amount of processing time, however, may be required before the next image can be shot.

1101

_]

Various

Shooting

Methods

thethedesired brightness. • at Use LCD monitor to confirm that the image was recorded • Please note that camera shake becomes a factor at low shutter speeds. Shoot with the camera attached to a tripod. • Use of the flash may result in an over-exposed image. If this occurs, shoot with the flash set to []. • The following are unavailable: Exposure Compensation Metering AE Lock FE Lock ISO speed: Auto, High ISO Auto Auto ISO Shift Flash: Auto Stow Synchro



Various

I Adjusting

the Tone []

(White

See Functions

Available

Shooting

Methods

Balance) in Each Shooting

11 1 1

[_[] Mode

(p. 238).

Normally, the [] (Auto) white balance setting selects an optimal white balance. When the [] setting cannot produce natural looking colors, change the white balance using a setting appropriate for the light source.

[] IAut° []

I Day Light

Settings are automatically set by the camera. For recording outdoors on a bright day. For recording under overcast, shady or twilight skies.

[] []

I Cloudy Tungsten

[]

Fluorescent

[]

Fluorescent H

[]

Custom

i_l

For recording under tungsten and bulb-type 3wavelength fluorescent lighting. For recording under warm-white, cool-white or warm-white (3-wavelength) fluorescent lighting. For recording under daylight fluorescent, or daylight fluorescent-type 3-wavelength fluorescent lighting. For recording with the optimal white balance data memorized in the camera from a white-colored object, such as white paper or cloth.

The white balance setting _nnot is selected for My Colors.



be adjusted when []

or []

1121

Various

Shooting

Methods

Using the Custom

White

Balance

You can set a custom white balance to obtain the optimal setting for the shooting conditions by having the camera evaluate an object, such as a piece of white paper or cloth, or a photo-quality gray card that you wish to establish as the standard white color. In particular, take a custom white balance reading for the following situations that are difficult for the [] (Auto) setting to detect correctly. • Shooting close-ups (Macro) Shooting subjects of monotone color (such as sky, sea or forest) Shooting with a particular source of light (such as a mercury-vapor lamp)

1. Press the _

button.

2. Use the ÷ or _1,button to select [] and choose [] with the ÷ or @ button.

Aim cloth •

the

camera

and

press

at a piece the

_

Ensure that the center frame is completely filled with the white image. Please note that the center frame will not appear when the digital zoom is in use or [] displays.

Press

the



@

button,

of white button,

paper

or

Various

_]

Shooting

Methods

1113

compensation • and You the are exposure recommended to set the setting shootingto [+0] modebefore to [] setting a custom white balance. The correct white balance may not be obtained when the exposure setting is incorrect (image appears completely black or white). • Shoot with the same settings as when reading the white balance data. If the settings differ, the optimal white balance may not be set. In particular, the following should not be changed. - ISO Speed - Flash Setting the flash to [On] or [Off] is recommended, tf the flash fires when reading the white balance data with the flash set to [Auto], make sure that you also use the flash when you shoot. • Since the white balance data cannot be read in Stitch Assist mode, preset the white balance in another shooting mode beforehand. • White balance data is retained even if the camera's power is turned off.



1141 Various

Shooting

IShooting

Methods

in a My Colors []See

Functions

Available

Mode in Each

[][] Shooting

Mode

(p. 238).

You can change the look of an image when it is shot. []

My Colors Off

Records normally with this setting.

[]

Vivid

Emphasizes the contrast and color saturation to record bold colors.

[]

Neutral

Tones down the contrast and color saturation to record neutral hues.

[]

Sepia

Records in sepia tones.

[]

B/W

Records in black and white.

[]

Positive Film

Use this option to make red, green or blue colors more intense like the Vivid Red, Vivid Green or Vivid Blue effects. It can produce intense naturalappearing colors like those obtained with positive film.

]

Lighter Skin Tone*

Use this option to make skin tones lighter.

[]

Darker Skin Tone*

Use this option to make skin tones darker.

Vivid Blue

Use this option to emphasize blue tints. It makes blue subjects, such as the sky or ocean, more vivid.

[]

Vivid Green

Use this option to emphasize green tints. It makes green subjects, such as mountains, new growth, flowers and lawns, more vivid.

[]

Vivid Red

[]

[]

*

Custom Color

Use this option to emphasize red tints. It makes red subjects, such as flowers or cars, more vivid. Use this option to adjust the contrast, sharpness or saturation settings or the color balance between red, green, blue and skin tones*. It can be used to make subtle adjustments, such as making blue colors more vivid or face colors brighter.

If the image containscolorsthat are the sameas humanskin,those colorswill also be changed. Youmay notobtain the expected results dependingonthe skin color.



I Various

Shooting

Methods

_ 115

Configuring My Colors Settings (Except _1)

Setting the Camera to a Custom Color Mode (m)

E



1161

Various

Shooting

i Changing

Methods

Colors []See

[][] Functions

Available

in Each

Shooting

Mode

(p. 238).

You can shoot images with the original colors transformed. This can be performed on movies as well as still images, allowing you to enjoy photographing with image or movie effects. However, depending on the shooting conditions, the images may appear rough or you may not get the expected color. Before you try to photograph important subjects, we highly recommend that you shoot trial images and check the results.If you set [Save Original] (p. 120) to [On] when shooting a still image, you can record the original image as well the transformed one.

[]

[]

_]

[]

Color Accent

[]

Color Swap

Use this option to have only the color specified in the LCD monitor remain and to transform all others to black and white. Use this option to transform a color specified in the LCD monitor into another. The specified color can only be swapped into one other color, and mu t p e co ors cannot be chosen.

which may increase the depending "noise" in the he ISO speed will rise on image. the shooting conditions,

Shooting

Still

in the Color Accent

Images:

1. Set the mode switch to a. 2. Press the _

button.

3. Use the ÷ or _1,button to select [] and choose [] with the ÷ or ._ button. 4. Press the _



button.

Mode

_]

•• You notcolor obtainaccent the expected The may default is green. results if you use the flash. • The specified color accent and color range is retained even if the camera's power is turned off.



I 118

_ Various

Shooting

Shooting

Original (Before

t

Methods

in the Color Swap

Color Swapping)

Select Still

Desired Color (After Swapping)

the

color

swap

mode.

Images:

1. Set the mode switch to a. 2. Press the _

button.

3. Use the ,1_or _1,button to select [] and choose [] with the _. or ._ button. 4. Press the _

button.

Movies: 1. Set the mode switch to '_. 2. Press the _

button.

3. Use the ÷ or ,11,button to select [] and choose [] with the ÷ or ._ button. 4. Press the _



button.

Mode

Various

I_]

Shooting

Methods

1119

•• You may not obtain results if you use into the white. flash. The default setting for the colorexpected swap mode changes green • The colors specified in the color swap mode and the color range are retained even if the camera's power is turned off. • The ISO speed may increase, or the noise in the image may increase depending on the shooting conditions.



1201Various

Shooting

Methods

Changing the Save Method for the Original Image When shooting still images in the Color Accent or Color Swap mode, you can set whether or not to save the original image as well as the transformed one.

1. Press the _

button.

2. In the [r_"l] menu, use the 41,or ,I, button to select [Save Original].

1. Use the ÷ or "l, button to select [On] or [Off]. 2. Press the _

[_]

button.

- hen Only[Save the transformed in the LCD monitor Original] is image Set to displays [On] while shooting in the Color Accent or Color Swap mode. - The transformed image is reviewed in the LCD monitor after shooting in the Color Accent or Color Swap mode. If you erase the image at this point, the original image is erased along with the transformed image. Exercise adequate caution before deleting a file. - The images are numbered consecutively. The original images are assigned the lower number and the transformed color accent or color swap images the next number. - Since two images are recorded with each shot, the number of shots remaining is approximately half the number displayed when this function is set to [Off].



I Various

_ Categorizing (Auto Category) Images []

See Functions

Shooting

Automatically Available

in Each Shooting

If you set Auto Category to [On], images are automatically preset categories as they are recorded. Peo le []

P

Methods

_ 121

[][][] Mode

(p. 238).

sorted into

For mages shot n L_, _k] or [_ mode, or mages w th faces detected when [AF Frame] is set to [Face Detect].

[]

Scenery

For images shot in []

mode.

[]

Events

For mages shot n m,

D,

_]

categorized using the My Category functionbut (p.they 136). Movies are not automatically categorized, can be



[_J, _,

[]

or []

mode.

I 1221

_

Various

Shooting

Methods

Registering Settings to the Print/Share Button [][][] []See

Functions

Available

in Each

Shooting

Mode

(p. 238).

You can register a function that you of Lenuse when shooting with the _.M button. The following functions can be registered. Menu Item

Page

Menu Item

Page

[]

DISP. Overlay

p 124

[]

Not Assigned

[]

+l-(Exp,)

p 107

[]

Rec. Movie

p 88

[]

White Balance

p 111

[]

Display Off

p 51

[]

CustomWhite Balance

p 112

[]

Play Sound Effect*

p 53

[]

Digital Tele-converter

p 69

m

Sets the sound Camera menu.

registered



to L_],

found

in the [Shutter

Sound]

section

of the My

Various

Shooting

Methods

1123

To Cancel the shortcut button Select [] in Step 2.

Using the

_N

Button

@

Each time that the _,_ button is pressed, the [] and [] settings are switched. For [] and _J, the corresponding setup screen is displayed. Each press of the _,_ button records the white balance data with the [] option. Since the frame does not appear at this point, ensure that the white paper or cloth is positioned so it appears at the center of the LCD monitor and then press the _,_ button. After using this function once, the white balance setting changes to the custom white balance setting. With the [] function registered, the movie recording starts with the recording pixels and frame rate settings selected in the Standard mode when you press the _,,_ button even if the mode switch is set to a or SCN. The [] function is useful for directing your subject's atten-tion to the camera right before taking a shot because it plays a sound when you press the ,_N

_]

button.

shooting mode selected, you press If a function thatiscannot be nothing used in will the happen currentlywhen selected the _,_, button.



1241 Various

Shooting

I Setting

Methods

the

Display []See

Functions

Overlays Available

in Each

[_[][_ Shooting

Mode

(p. 238).

You can display vertical and horizontal grid lines, a 3:2 print area guide, or both on the LCD monitor while shooting to help check the position of your subject. Off Grid Lines

3:2 Guide Both

Displays grid lines to divide the screen into 9 parts. Helps confirm the vertical and horizontal positioning of the subject. Helps confirm the print area for a 3:2 print.* Areas outside the printable area are grayed out. Displays both the grid lines and the 3:2 guide simultaneously.

* Irna( es are still recorded

1. Press

at the standard

the _

2. In the [r'_]

aspect

ratio of 4:3.

button. menu, use the I" or _1,

button to select [Disp. Overlay].

2 1. Use the ÷ or ._ button to select [Off], [Grid kines],

[3:2 Guide] or

[Beth]. 2. Press

_]

the _

button.

• The Only grid [Grid Lines] be used or [] is lines and can 3:2 guide willwhen not be[]recorded in selected, the image.or in movie mode



Various

i Setting

the Auto Rotate []

See Functions

Function

Available

Shooting

Methods

1125

[][_[_

in Each Shooting

Mode

(p. 238).

Your camera is equipped with an Intelligent Orientation sensor that detects the orientation of an image shot with the camera held vertically and automatically rotates it to the correct orientation when viewing it in the LCD monitor.

_

• This function may not operate correctly when the camera is pointed straight up or down. Check that the arrow [] is pointing in the right direction and if it is not, then set the Auto Rotate function to [Off]. • Even if the Auto Rotate function is set to [On], the orientation of images downloaded to a computer will depend upon the software used to download the images.



1261 Various

Shooting

Methods

sensor judges the upper to be "up" and the end to be hen the camera is held end vertically to shoot, the lower Intelligent Orientation "down". It then regulates the optimal white balance, exposure and focus for vertical photography. This function operates regardless of the on/off status of the Auto Rotate function.

_]

_ Creating an Image Destination (Folder) []See

You can create be automatically Create

New

Folder Auto

Create

Creating

Functions

Available

a new folder at any time saved to that folder. Creates

in Each

[][][][]

Shooting

and the recorded

a new folder the next time you shoot

Mode

(p. 238).

images

will

images.

To

create an additional folder, insert the check mark again. You can also specify a date and time if you wish to create a new fo der us ng a shoot ng t me after the spec fled date and t me.

a Folder



the Next

Time You Shoot.

I Various

Shooting

Methods

_ 127

Setting the Day or Time for Automatic Folder Creation.

_]

will automatically created when into youone record more than folder that p to 2000 imagesbecan be saved folder. A new number even if you are not creating new folders.



1281 Various

Shooting

Methods

i Resetting

the []See

File

Number

Functions

Available

[][]_[] in Each

The images you shoot are automatically assigned can select how the file number is assigned.

Shooting

Mode

file numbers.

(p. 238).

You

A number one higher than the last one recorded is assigned to the next image. This is convenient for managing all your images together on a computer because you avoid file name Continuous

Auto

Reset

Select

duplication when changing folders or memory cards.* When a blank memory card is used. Ifa memory card with recorded data is used, the 7-digit number for the last recorded folder and image is compared with the last one on the card, and the larger of the two is utilized as the basis for new images. The image and folder number are reset to the starting value (100-0001).* This is convenient for managing images on a folder-by-folder basis. When a blank memory card is used. If a memory card with recorded data is used, the number following the 7-digit number for the last recorded folder and image on the card is utilized as the basis for new images.

[File

Numbering].

1. Press the _

button.

2. Use the ÷ or "I_button to select the [ F_'_] menu. 3. Use the ÷ or _1, button to select [File Numbering].

1. Use the ÷ or ._ button to select [Continuous] or [Auto Reset]. 2. Press the _ button.



Various

File

and

Folder

Shooting

Methods

1129

Numbers

Recorded images are assigned consecutive file numbers starting with 0001 and ranging up to 9999, while folders are assigned numbers starting with 100 and ranging up to 999. Up to 2,000 images can be saved into a single folder. New Folder Created

Memory Card Exchanged for Another

Memory Card 1

MemoryCard1 MemoryCard2

Continuous

[email protected]

ooo2

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

Memory Card 1

MemoryCard1 MemoryCard2

Auto Reset

• Images may be saved to a new folder when there is insufficient free space even if the total number of images in a folder is less than 2,000 because the following types of images are always saved together into the same folder. -

Images from continuous shooting Self-timer images (custom) Stitch Assist mode images Still images shot in Color Accent/Color Swap mode with the [Save Original] category set to [On]. • Images cannot be played back when the folder numbers are duplicated or image numbers are duplicated within folders. • Please refer to the Software Starter Guide for information regarding folder structures or image types.



1301 Playback/Erasing

Youcanalso usethetouch control dialtoselect images various operations.

See p. 41.

J q Magnifying

Z_

Use

the

÷,

and perform

Images

÷,

÷ or

+ button

[]

to

move

around

_the image, • If you press the FUNC./SET button while in magnified display, the camera switches to image advance mode and _L+ will display. You can use the ÷ or ._ button to advance to the next or previous image at the same level of magnification. The image advance mode is cancelled when you press the FUNC./ . SET button again. ................... YO hang

t!ca!!o

w!!h the

eve[ .....................

To Cancel the Magnified Display Press the zoom lever toward :-:. (You can also cancel it immediately by pressing the MENU button.) _4_

Movie frames and index playback images cannot be magnified:



I Playback/Erasing

_: Viewing (Index

Images

in Sets

_ 131

of Nine

Playback)

[]

To Return to Single Image Playback Press the zoom lever toward 0,. Switching

between

Sets

of Nine

Images

The jump bar will display if you press the zoom lever toward =-: while in index playback and you can switch the display between sets of nine images. • Use the ÷ or ,_ button to move to the previous or next set of 9 images. Hold the FUNC./SET button down and press the ÷ or ,_ button to jump to the first or last set.

Jump



Bar

I 132 _ Playback/Erasing

Checking Focus Expressions the (Focus

and Peoples' Check display)

[_

You can check the focus and peoples' expressions by using the focus check display. Since you can also change the magnification level and switch between images, it is easy to check peoples' expressions and look for closed eyes.

Displaying

the Focus

Check

•_

focus

check

screen

Button

appears,

• The frame displays on the screen as follows. Frame Color

Content

Orange

riD_plays the area of the image shown at the bottom

White

Displays at the focal point (AF frame) Displays around a face detected in playback mode (Face Frame)

Gray

• The orange frame can be shown at a different magnification, moved or switched to a different frame (p. 133).



I Playback/Erasing

a Changing

the

Display

m Changing

between

• Changing

the Display

1133

Magnification

Frames

Position

.... zoom lever toward .............................................................. o,. • The bottom right of the screen is magnified.



134

Playback/Erasing

to change tion.

the display

posi-

• Pressing the FUNC./SET button returns the orange frame to the prior position. If multiple frames are displayed, the position of the orange frame changes. To cancel the Focus Check Press the MENU button.

l_

Jumping

display

to Images

[]

When you have many images recorded onto a memory card, it is handy to use the five search keys below to jump over images to find the object of your search.

[] [] [] [] [] []

Shot Date

Jumps to the first image of each shooting date.

My Category

Jumps to the first image in each category.

Folder

Jumps to the first image of each folder.

Movie

Jumps to a movie.

By 10 Images

Displays the image 10 images ahead.

By 100 Images

Displays the image 100 images ahead.



Playback]Erasing

Use

the

select

4, or



a search

button

to

1135

ImageInformation

key

the search key.slightly i according he screentosample will vary You can show/hide image information using the DISP. button.

Display !_,

[],

the []

Images.

Selected

Selectthe searchkey

1. Use the 4" or 4, button to select date, category or folder for playback. 2. Press the _

button.

If you circle your finger on the Touch Control Dial you can check the target image. The camera will switch to defined playback mode and display a blue frame. You can limit playback to the images corresponding to the search key. Press the _ button to cancel defined playback mode. _,

_i_, []

Selected

1. Press the 4- or 4- button.

setting. i the ressing the MENU button cancels Press the FUNC./SET button to switch the camera to defined playback mode when the [] is selected. Press the _ button to cancel this mode.



I 136 _ Playback/Erasing

following circumstances. he defined playback mode will be canceled under the - When selecting images in a range - When displaying images not supported in defined playback - When newly saving images that have effects added or edited - When images are deleted using [Erase] from the [FD--]]menu

_]

Organizing

Images

by Category

(My Category)

[]

You can organize images into prepared categories. The following operations can be performed if the images are sorted into categories. • Image searches (p. 134)

• Erase (p. 168)

• Slide Show (p. 146)

° Configure print settings (p. 174)

• Protect (p. 164)

Categories

_

Scenery People Events

Category

[] i_jl_jl_j

Selection

Select

Methods

For viewing and selecting images singly. For picking a first and last image and selecting all the mages n the range.

Select Range Select

To Do My Category 1-3

[My

1. Press the _

Category]• button.

2. In the [FD]] menu, use the ,1_or 41, button to select []. 3. Press the _"J_ button.



Playback/Erasing

1137

• [Select]

1. Use the ÷ or 4, button to select images to categorize. 2. Use the ,I, or 41,button to select a category. 3. Press the @

i

button.

Press the the MENU button tobutton complete setting. the setting. ressing FMNC./SET againthecancels tf you press the ,13,,,Mbutton in playback mode, you can display this screen immediately.



138 Playback/Erasing •

Select

Range]



Playback]Erasing

_]

This also can be set in the index playback mode.



1139

1401PlaybacldErasing _ Viewing

Movies

(Operating

the

Movie

Control

Panel)

[]

Movies cannot be played in the index playback mode.

1. Use the ÷ or "I, button to select a movie. 2. Press the @

button.

• Images with a _ movies.

icon are

1. Use the ÷ or ,_ button to select D.

2. Press the @

button.

• The movie will pause if you press the FUNC./SET button during playback. It will resume when you press the button again. • When playback ends, the movie stops at the last frame displayed. Press the FUNCJSET button to

Playback

Progress

Time movie was Volume (Adjust

Bar shot

Level it with the

_- or

display the movie control panel. button) • You can switch between showing/ hiding the playback progress bar by pressing the DISP. button while playing a movie. • If playback was halted partway through in the prior viewing session, playback will resume from the last frame displayed.



PlaybacktErasing 1141 Operating the Movie Control Panel Use the ÷ or ,1. button to select a control and press the FUNC./SET button.

[]

Exit

playbackEnds playback and returns to single image

[]

I

Print

See the will Direct Print when User aGuide forisdetails. An icon display printer connected.

[]

I

Play

Play

[]

I

Slow Motion

button speed You cantouse the up ÷ playback. button to slow down or the ,_

[]

I

First Frame

Displays the first frame

[]

I Previous Frame Rewinds if the FUNC./SET button is held down.

[]

Next Frame

down. Fast Forwards if the FUNC,/SET button is held

[]

Last Frame

Displays the last frame

[]

Edit

_]

i

Switches to the movie editing mode

movie on acontrols TV set (p. 183). the volume when • playing Use the atelevision's to adjust • Sound cannot be played back in slow motion playback or

II.



1421 Playback/Erasing

i Editing

Movies

You can delete portions of recorded movies. • The actual position of the edited movie may differ slightly from editing the results viewed on the LCD monitor. • Movies 1 second or longer before editing can be edited in 1second increments, but those that are protected or less than 1 second long (1_ of 15 sec.* or 30 sec.**) cannot be edited. *

When

the shooting

interval

is 1 sec.

** When

the shooting

interval

is 2 sec.

1. Use the ÷ or ,_ button to select m.

2. Press the _

button.

• The movie editing panel and the movie editing bar will display.

T Movie Editing Panel

Movie

1. Use the ÷ or 4, button to select [] []

Editing

Bar

(Cut Beginning) or

(Cut End).

2. Use the _. or ._ button to specify the cut point (_). • To check a temporarily edited movie, select [] (Play) and press the FUNCJSET button. • To continue editing, repeat Step 2. • Selecting [] (Exit) cancels the edit and restores the movie control panel.



Playback/Erasing

_]

1143

save an edited movie. If thefilebattery of charge partway epending on the movie's size, runs it mayout take some time to through, edited movie clips cannot be saved. When editing movies, it is recommended to use a fully charged battery or the separately sold AC Adapter Kit ACK-DC30 (p. 210).



1441Playback/Erasing i Rotating

Images

in the

Display

Images can be rotated clockwise 90 ° or 270 ° in the display.

Original

90 °

Select

270 °

[Rotate].

1. Press the _

button.

2. In the [FD]] menu, use the 41.or 41, button to select rd. 3. Press the _'_

button.

1. Use the ÷ or ,_ button to select an image to rotate. 2. Press the _

button.

• Cycle through the 90°/270°/original orientations with each press of the FUNC./SET button. • This also can be set in the index playback mode. O

hen images are downloaded to a computer, the orientation of images rotated by the camera will depend upon the soft'ware used to download the images.



Playback/Erasing

Playback

with

Transition

Effects

1145

[]

You can select the transition effect displayed when switching between images. [] No transition effect. _q I The displayed image darkens and the next image gradually brightens until it is displayed. []

Press the 4. button to have the previous image display from the left and the 4. button to have the next mage d sp ay from the r ght.



1461 Playback/Erasing

j Automated Automated

Playback

(Slide

Shows)

playback of memory card images.

Image settings for slide shows are based on the Digital Print Order Format (DPOF) standard. []

All Images

Plays all images on a memory card in order.

Date

Plays images bearing a specified date in order.

[]

My Category

Plays the images in the selected category in order.

[]

Folder

Plays images in a specified folder in order.

[]

Movies

Plays movie files only, in order.

[]

Stills

Plays still images only, in order. Plays the images selected for each slide show, Custom 1, Custom 2 or Custom 3, in order (p. 149).

_11__']1 Custom 1-3 Select

[Slide

Show].

1. Press the _

button.

2. In the [FD--I]menu, use the 4" or 41, button to select Ira. 3. Press the _

button.

1. Press the ,IF button. 2. Use the 4" or 4" button to select the slide show type. • [], _J, r'=l: pressthe FUNC./SET button to select a date, category or folder to be played back (p. 148). • mL_l: press the FUNC./SET button to setect the images to be played back (p. 149). • If you want to add a transition effect to play back images, use the ,IF button to select [Effect] and choose the type of effect with the 4" or 4" button (See the next page).

Playback]Erasing

1147

To Stop the Slide Show Press the MENU button

Transition

Effects

You can select the transition effect used when one image is replaced by another. []

No transition effect. IThe new image gradually brightens as it moves upward from the

[]

bottom, s The new image first appears in a cross shape and gradually expand to display the full image.

[]

Portions of the new image move horizontally, then the image expands to display the full image.

_]

from the current image displayed by holding FUNCJSET In single image playback mode, you can startthe a slide show button whiIe you press the r_' button. Please note that if you do this while the last image shot is displayed, the slide show will start from the first image using the same date.



1481 PlaybacldErasing Select

a date/category/folder

to

play

back

([]IE]ID) Select

a playback

method,

1. Use the ÷ or ,_ button to select I_], _f'J or I""1. 2. Press the @

,2

Select

button.

images

to play

1. Use the ÷ or •

button to select

a date/categoryffolder playback. 2. Press the _

back.

to

button.

A _/will appear on selected images. To cancel the selection: press the FUNC./SET button again. Multiple selections can be made for the date/category/ folder. The images will play back in the order of selection. To check the images for each date/category/folder: ÷ or "!, button. Pressing the MENU button completes the setting.



use the

Playback/Erasing

Selecting

Images

for

Playback

1149

(H_U)

Select only the images that you wish to play back and save them as a slide show (Custom 1, 2 or 3). Up to 998 images can be selected. They will be played back in their order of selection. Select

a playback

method,

1. Use the 4- or 4- button to select

RHorH. • Only the [] first.

icon will display at

2. Press the _

button.

• When you set [], the icon will change to [] and [] will display. [] the same way when they are set. ,2

Select

images

to

play

back.

and []

will change in

Checkmarkindicating selection Number selection

indicating order

the

1. Use the 4- or 4- button to choose images to play back. 2. Use the _)

button to select/

desetect the images. • You can also select images in the index playback mode. • Pressing the MENU button completes the setting.

_]

1.electing After selecting_-[] in step 1, use the 4, button to All Images select [Mark all] and press the FUNC./SET button. 2. Use the 4, button to select [Mark all], press the FUNC./ SET button. 3. Use the 4- button to select [OK] and press the FUNC./ SET button. To desetect all images, select [Reset].



1501

Playback/Erasing

Adjusting

the Play Time

and Repeat

Settings

Play Time Sets the duration that each image displays. Choose between 3-10 seconds, 15 seconds and 30 seconds. Displaying time can vary slightly depending on the image. Repeat Sets whether the slide show stops when all the slides have been displayed or continues until stopped.

1. Use the ÷ or .I, button to select [Set up]. 2. Press the ('(_,"_button.

1. Use the ,IF or 41,button to select [Play Time] or [Repeat]. 2. Use the ÷ or + button to select a setting. 3. Press the _



button.

I Playback/Erasing

Red-Eye

Correction

Function

_ 151

[]

You can correct red eyes in recorded images. lURed

eyes may not be automatically detected in some images or the result s may not tum out as you intended, - Faces near the screen edges or faces that appear extremely small, large, dark or bright in relation to the overall image. - Faces turned to th e side or at a diagona!! or faces with a portion hidden_

Select

[Red-Eye

1. Press the _

Correction], button.

2. In the [FD---I]menu, use the ,IF or button to select M3. Press the _

Select

an

button.

image,

1. Use the 4- or "F button to select the image you wish to correct red eyes. 2. Press the _

button.

where a red eye is detected. If red-eye is not automatically detected, select [Add Frame] with 4- or 4, button and press io A frame will automatically display FUNC./SET button (p. 153). To cancel the correction frame, select [Remove Frame] and press the FUNCJSET button (p. 154).



152Playback/Erasing 1. Use the ÷ or ÷ button to select [Start]. 2. Press the _

button.

Use the ÷ or ÷ button to select

1,

[New File] or [Overwrite]. 2.

Press the _

button.

[New File]: Saved as new file with a new name. The uncorrected image is stored. The new image is stored as the last file. [Overwrite]: Saved with the same file name as the uncorrected image. The uncorrected image is erased. When [New File] is selected, proceed to the step 5.

1. Press the _

button.

2. Use the ÷ or ÷ button to select [Yes]. 3. Press the _

button.

• Selecting [No] returns to the Play menu.

''

••

Red-eye correction cannot be performed on movies. Overwriting cannot be performed on protected images.



PlaybacldErasing

_]

1153

correction cannot be performed. • red-eye When there is not enough space left on the memory card, • Although you can apply red eye correction any number of times to an image, the image quality will gradually deteriorate with each application. • Since the correction frame will not appear automatically on images that have already been corrected once with the RedEye Correction function, use the [Add Frame] option to correct them.

Add Correction Select

Frame

[Add

Frame],

1. Use the ÷ or .l, button to select [Add Frame]. 2. Press the _

button.

• A green frame will display.

2

Adjust

the

position

of the

frame, 1. Use the ÷, _1,, ÷ or .I_ button to move the frame. • Size of the frame can be changed with the zoom lever. 3

Add

a correction

frame.

1. Press the _ button. • The correction frame will be added and the frame color will change to white. • To add additional frames, adjust the position and then press the FUNC./SET button. • Up to 35 frames can be added. • When you finish adding frames, press the MENU button.



1541 Playback/Erasing (refer tothe image icorrection, nstep2onpage 153): _] following Tocorrectly perform red-eye takenote ofthe - Adjust thecorrection frame sizesothatitonlysurrounds thered-eye portion tobecorrected. - When there areseveral subjects withred-eye, besure to addonecorrection frame persubject. Removing ..... t

seiect

Correction [Remove

Frames Frame].

.........................................................................

1. Use the ÷ or ,_ button to select [Remove Frame]. 2. Press the @

button.

frame, 1. Use the ÷ or + button to select a frame to remove. • The selected frame will appear in green. 3

Delete

the

1. Press the @

frame. button.

• The selected frame will disappear. • To continue deleting frames, return to Step 2. • When you finish deleting frames, press the MENU button.



I Playback/Erasing

l Adding Effects with the My Colors Function You can add effects to recorded images (stills only) using the My Colors function. The following selection of My Colors effects is available. For details, see p. 114. []

Vivid

[]

Lighter Skin Tone

[]

Neutral

[]

Darker Skin Tone

[]

Sepia

[]

Vivid Blue

[]

B/W

[]

Vivid Green

[]

Positive Film

[]

Vivid Red

Select

[My

Colors],

1. Press the _

button.

2. In the [FDT] menu, use the ,IF or button to select []. 3. Press the ('_,c_ button.

Select

an

image.

1. Use the 4- or 4. button to select an image. 2. Press the (_u,_ button.



_ 155

[]

156PlaybacldErasing 1,

Use the ÷ or ,_. button to select the My Colors type

2. Press the @

button.

The displayed image will reflect the My Colors effect. You can press the zoom lever toward Q. to check the image at a higher magnification. While the image is zoomed, you can press the FUNC./SET button to switch between the image transformed with the My Colors effect and the original non-transformed image.

1. Use the ÷ or ,_ button to select [OK]. 2. Press the @

button.

• The newly saved image transformed with the My Colors effect will be the last one in the list. • To continue adding effects to other images, repeat the procedures from Step 2 onward. 5'

Display

the

1. Press the _

saved

image,

button.

2. Use the ÷ or .I_ button to select [Yes]. 3. Press the _

button.

• Selecting [No] returns to the Play menu.



Playback/Erasing

_]

1157

My there Colorsis effects cannot be added. • the When not enough space left on the memory card, • Although My Colors effects can be added any number of times to an image, the image quality will gradually deteriorate with each application and the intended colors may not be achieved. • Color in images taken using My Colors (p. 114) in shooting mode and images edited with the My Colors function in playback mode may differ slightly.



I 158

_ Playback/Erasing

j Resizing

Images

You can resave images that were recorded at high recording pixet settings at lower settings. I_111600 x 1200 pixels []

640 x 480 pixels

[]

320 x 240 pixels

1. Press the _

button.

2. In the [FD]] menu, use the 41,or 41, button to select []. 3. Press the 1_ button.

1. Use the ÷ or .I, button to select an image to resize. 2. Press the _

button.

• The FUNC./SET button is not setectable for images that cannot be resized.

1.

Use the ÷ or "!, button to select I_1

morro 2.

A

Press the _

button.

Some recording pixet settings cannot be selected depending on the available space of the memory card.



Playback/Erasing

_]

Movies and images shot in wide mode cannot be resized.



1159

I 160 _ Playback/Erasing

iAttaching

Sound

Memos

to Images

In playback mode, you can attach sound memos (up to 1 min.) to an image. The sound data is saved in the WAVE format.

1. Press

the _

button.

2. In the [FD--I]menu, use the ,IF or 41, button to select []. 3. Press the _

button.

display.

again resumes recording. • Up to 1 minute of recordings added to any one image.



can be

Volume (Adjust button)

it with the

÷

or

41,

Playback/Erasing 1161 Sound

Memo

Panel

Use the ÷ or ,). button to select an option and press FUNC.ISET.

i

_._

Record

Starts recording.

Pause Exit Play

Stops recording, playback. Ends the operation. Plays back.

Erase

Erases.

• You cannot attach sound memos to movies. • Sound memos for protected images cannot be erased.



1621 Playback/Erasing j Sound-Only

Recording

(Sound

Recorder)

You can record a continuous sound memo for up to approximately hours without taking a picture.

1. Press the _

[B 2

button.

2. In the [i'D--I] menu, use the ÷ or _1, button to select IO!. 3. Press the _ button.

1.

Use the ÷ or .I, button to select D.

2. Press the _

button.

The elapsed recording time displays. You can use the I" or ,11,button to change the sampling rate. The Sound Recorder Panel recording quality rises Remaining Time progressively as you select [11.025 kHz], [22.050 kHz] or [44.100 kHz], but the recorded file sizes increase correspondingly. Press the FMNC./SET button to stop the recording session. Pressing the button again starts a new recording session.



Playback/Erasing 1163 Sound

Recorder

Panel

Use the ÷ or .). button to select an option and press FUNC./SET.

Record Pause Play []i

Starts Stops recording. recording, playback. Use the ÷ or _1,button to select a sound to play and )ress the FUNC./SET button.

Exit Rewind

Holding FUNC./SET Returns down to the the menu screen. button rewinds. The sound cannot be heard while rewinding.

Fast Forward

Holding down the FUNC./SET button fast forwards. The sound cannot be heard while fast forwarding. Select [Erase] or [Erase all] in the confirmation screen

Protect i

Erase Volume

_]

Protects against accidental erasure. Use the ,IF or _1, button to select a sound and the FMNC./SET button to select/deselect protection. and press the FUNC./SET button. You can use the 'IF or ,k button to adjust the volume.

(p. 220). Data Rates and Recording Durations • (Estimated) See Sound Recorder • Recording will automatically stop when the memory card is full.



I 1641 Playback/Erasing

j Protecting

Images

You can protect important images and movies from accidental erasure. Select Select Range

You can configure the protection settings for each image singly while viewing them. You can select a first and last image and protect all the images in the range.

Select by Date Select by Category

You can protect the images from a specified date. You can protect the images in a specified category.

Select by Folder All Images

You can protect the images in a specified folder. You can protect all the images on a memory card.

1. Press the _

button.

2. In the [i'D--I] menu, use the 4, or _1, button to select []. 3. Press the _ button.

1. Use the 4, or 41,button to choose a selection method. • Pressing the MENU button returns to the prior screen. 2. Press the @



button.

Playback/Erasing

1165

• [Select]

i

• [Select

Range]

• You can circle your finger on the Touch Control Dial to select the first and last image. 1. Press the Q

button.

2. Use the ÷ or 4. button to select the first image for the range to protect. 3. Press the _



button.

i i i i i i !i ii ii ii ii ii i

166

Playback/Erasing

1. Use the ._ button to select [Last Image]. 2. Press the _#_ button.

3. Use the _. or .). button to select the last image in the range. 4. Press the _ • An the the • Up 5

button.

image with a lower number than first image cannot be selected as last image to 500 images can be selected.

Protect

the

images,

1. Press _1,and choose [Protect]. 2. Press the @

button.

• The screen will return to the selection method screen. • Selecting [Unlock] cancels selection of the protected image.



Playback/Erasing

• [Select

by Date]/[Select



by Category]/[Select

1167

by Folder]

1681 Playback/Erasing • [All

Images]

1. Use the ,1_or 41, button to select [Protect]. 2. Press the _

button.

• Returns to the selection method screen. • Selecting [Unlock] removes protection for all the images. • Selecting [Stop] cancels protection settings for the current selection.

_]

This also can be set in the index playback mode.

_ Erasing

Images

[]

You can erase images from a memory card. Select Select

Range

Select

by Date

Select

by Category

Select

by Folder

All Images

i_

Erase images after selecting them one at a time. For picking a first and last image and erasing all the images in the range. Erases images corresponding to the selected date. Erases images in the selected category. Erases images in the selected folder. Erases a mages on a memory card.

• Note that erased images cannot be recovered. Exercise adequate caution before erasing an image. • Protected images cannot be erased with this function.



Playback/Erasing

1169

1. Use the ÷ or 4, button to select an erasure method. • Pressing the MENU button returns to the prior screen. 2. Press the Q

button.

• [Select] Select

the

image.

1. Use the ÷ or 4, button to select an image to erase. 2. Press the ('_

button. • ii_ ¸i_ _!_i

• Pressing the FUNC./SET button again deselects the setting. 3. Press the _ Erase

the

button. image.

1. Use the ÷ or 4, button to select [OK]. 2. Press the _

button.

• Selecting [Stop] cancels selection of the image you are about to erase and returns to Step 2.



' _

-•

I 170 _ Playback/Erasing •

Select

Range]



Playback]Erasing

• [Select

by Date]/[Select

by Category]/[Select

1171

by Folder]

!



172 i Playback/Erasing • [All

Images]

1. Use the ÷ or ,_ button to select [OK]. 2. Press the _

button.

• Selecting [Cancel] cancels selection of the image you are about to erase and returns to Step 2. • Pressing the FUNC.lSET button while erasing is in progress cancels the procedure.

_]

•• This Please format theset memory card when you want also can be in the index playback mode.to erase not only image data but also all the data contained on the memory card (p. 65).

j Registering Functions to the Playback Button You can register a function that you often use to the [] following functions can be registered. Function

Reference Page

[]

Standard .1

[]

Slide Show .2

p. 146

[]

Sound Recorder

p. 162

"1 Default setting mode (p. 43)). *2 Slide Show

(It can be used

will not play in the

1. Press the _

to switch

between

Index playback

power

mode.

button.

2. In the [i'a-I] menu, use the ÷ or 4, button to select []. 3. Press the _b_ button.



button. The

off/playback

mode/shooting

Playback/Erasing

To cancel: select []

Using the

_]

1173

in Step 2.

I-_ Button

camera to playback when itmode, is pressed a • the When you press the [] mode. button Then in shooting it switches second time, the registered function is called up. • Registering a function to the [] button disables its ability to turn off the camera power.



CallOll

CDI-E366-010

XX07XXX



© 2007

CANON

INC.

PRINTED

IN JAPAN

Similar documents