Universal Remote MXW-920i Owner\'s Manual

* The preview only show first 10 pages of manuals. Please download to view the full documents.

Loading preview... Please wait.

Manuals information


Report / DMCA this file

Description

Waterproof controller

Manuals Content

MXW-920i Waterproof Controller Owner's Manual



MXW-920i Owner’s Manual ©2012-2013 URC, Inc. The information in this owner’s manual is copyright protected. No part of this manual may be copied or reproduced in any form without prior written consent from Universal Remote Control, Inc. UNIVERSAL REMOTE CONTROL, INC. SHALL NOT BE LIABLE FOR OPERATIONAL, TECHNICAL OR EDITORIAL ERRORS/OMISSIONS MADE IN THIS MANUAL. The information in this owner’s manual may be subject to change without prior notice. Complete Control is a registered trademark of Universal Remote Control, Inc. Entertainment Made Simple is a trademark of Universal Remote Control, Inc. All other brand or product names are trademarks or registered trademarks of their respective companies or organizations.

Universal Remote Control, Inc. 500 Mamaroneck Avenue, Harrison, NY 10528 Phone: (914) 835-4484 Fax: (914) 835-4532



TABLE OF CONTENTS

Congratulations!

1

Using the MXW-920i

2

Displaying the Settings Screen

3

Selecting from the Setup Screen

3

Setting the LCD

4

Light Settings

6

Sound Volume

6

System Settings

7

Version Information Displays

7

Selecting from the Edit Screen

8

Adjusting the Text

8

Learn commands

9

Erasing learned data

9

Performing a Factory Default

9

Battery Installation

10

Specifications

10

Limited Warranty Statement

11

End User Agreement

13

Federal Communication Commission Interference Statement

14

Regulatory Information to the user

15

Declaration of Conformity

16



MXW-920i OWNER’S MANUAL

Congratulations! Thank you for purchasing the Complete Control MXW-920i waterproof wand-style controller. This unit can directly control every IR device in your home. You can also control devices located in different rooms by integrating an MRF base station. Controlling your home is simple with the MXW-920i remote.

Waterproof IR/RF wand-style controller The Waterproof MXW-920i wand-style controller can be used outside as well as indoors. It’s the perfect controller for kitchen, bath and poolside use. It is not intended for underwater use or exposure to sugar-based substances (e.g., soda or lemonade). Make sure the MXW-920i is dry when changing batteries. IP Code 54, JIS Class 4.

Ideally suited for poolside control Entertain your guests by controlling your sound system or more while poolside. Use the MXW-920i by the pool without the worry of damaging your remote.

Controls up to 40 devices The MXW-920i has the capacity to control up to 40 devices throughout your home. Turn off devices that are not in use when walking by a room. It’s like having a master key for your electronic devices.

Ultra-reliable narrow band RF - compatible with URC 433.92 MHz RF Base Stations The MXW-920i can communicate directly to RF base stations, such as the MRF-350i and the MRF-260i. It also natively communicates with URC Lighting via 433.92 MHz RF. This gives the MXW-920i the ability to control your system without being in direct line-of-sight.

Fast setup of complex systems via Complete Control PC editor To fully automate an audio/video system, and integrate one way automation of servers etc., the programmer must have detailed knowledge of each component, LAN configuration, WiFi optimization and how the system is connected and operated. Only a trained and certified professional audio/video installer can install an MXW-920i remote control in a timely and efficient manner.

Page 1



MXW-920i OWNER’S MANUAL

Using the MXW-920i The MXW-920i displays the Main or Device page at the top of the screen. Below the title, the LCD displays the device or command names. All the hard buttons of the MXW-920i are changed to control the functions of the selected device. The Title displays the Main or Device pages you can control.

The LCD button labels describes the functions available for the current activity or device.

Press either of the Page buttons to see any other available choices.

The Channel and Previous Channel buttons adjust channels for devices with channel functions (i.e. cable boxes)

The Volume and Mute buttons always control the sound regardless of what screen is displayed.

The 5-way cursor buttons enable you to navigate on screen guides and menus with ease.

The Transport buttons (Play, Stop, Skip-, Skip+, FF, REW and Pause) operate when the selected device requires them. When watching Cable TV, use the number keypad to enter channel numbers. When listening to a CD, the number keypad enters track numbers.

The Light button backlights all the buttons and activates the LCD screen The Number keypad enters numbers for the devices you’ve selected. When watching Cable TV, use the number keypad to enter channel numbers. When listening to a CD, the number keypad enters track numbers. Page 2



MXW-920i OWNER’S MANUAL

Displaying the Setup Screen You can adjust the settings of the MXW-920i controller whenever you like. Simply press and hold both the Main and the Enter buttons at the same time for three seconds. The screen displays the Setup and the Edit screens. Press the Page + and - buttons to toggle between both screens. If you do not press any button on the Setup screen within 30 seconds, the MXW-920i times out and automatically returns to normal operation. You can return to normal operation before that by pressing the Main button. At the same time, press and hold both the Main and the Enter buttons. When the Setup screen appears, release the two buttons.

Selecting from the Setup Screen Simply touch the button for the setting you’d like to adjust: LCD - Adjustments for the LCD screen (brightness, contrast, light) Light - Adjustments for backlight of the buttons. Sound - The volume of the beeps. System - Set the threshold for the low battery warning Version - Displays factory info.

Page 3



MXW-920i OWNER’S MANUAL

Setting the LCD With these settings, you can set the MXW-920i to constantly display the LCD or have it turn off when not in use. Additionally, you can control the contrast of the screen and the color of the backlighting.

To activate the LCD On/Off setting, press this button. See below. To activate the Contrast setting, press this button. See the next page. To activate the Brightness setting, press this button. See the next page. To exit without saving any changes you have made, press Exit.

LCD Timer Setting: If you set the LCD to OFF, the timer settings appear. The LCD turns off after the set amount of time set by adjusting the Left and Right arrow keys. The timer can be set to turn off the LCD between 10 seconds and 20 minutes. The Timer Interval is displayed here. To save any changes you have made, press Save. To exit without saving any changes you have made, press Exit. To change the timer interval, press the Left or Right arrow keys.

Page 4



MXW-920i OWNER’S MANUAL

Setting LCD Contrast You can adjust the contrast of the LCD screen using the Left and Right arrow keys once the LCD Contrast screen has been selected (shown on the previous page).

The current contrast is displayed here via a bar graph. To save any changes you have made, press Save. To exit without saving any changes you have made, press Exit. Adjust the Contrast setting with the Left and Right keys as shown in the previous pages.

Setting LCD Brightness You can adjust the brightness of the LCD screen using the Left and Right arrow keys once the LCD Brightness screen has been selected (shown on the previous page).

The current brightness is displayed here as a bar graph. To save any changes you have made, press Save. To exit without saving any changes you have made, press Exit. Adjust the LCD brightness with the Left and Right keys as shown in the previous pages.

Page 5



MXW-920i OWNER’S MANUAL

Light Settings You can adjust the backlighting of the remote in two additional ways: 1. You can turn on/off the LCD and the hard button backlighting. 2. You can select the length of time the lighting stays on after the last button press from a range of values between 10 seconds and 90 seconds. Change whether the backlighting is on or off by pressing this button. If you want the backlighting always off, set it to OFF. If you would like the backlighting on, select ON. The current timer setting is displayed here in seconds. Adjust the backlighting timer setting with the Left and Right keys as shown in the previous pages.

Sound Volume Your MXW-920i beeps whenever a button is pressed. However, you can adjust the volume of the beep to one of four levels as shown here.

The current Beep volume is displayed here as a “bar.” Adjust the volume of the beep by tapping the Left and Right arrow keys as shown in the previous pages.

Page 6



MXW-920i OWNER’S MANUAL

System Settings You can set your MXW-920i to display the Low Battery warning at a power level between 0% and 20% (in 5% increments).

The Power bar indicates available power in black. Press here to adjust the battery warning level. The Memory bar indicates available memory in black. The memory in use is white. To exit, press Main.

Version Information Displays Should you be curious, the Version indicates what firmware and software versions were used to program your MXW-920i.

To exit, press Main.

Page 7



MXW-920i OWNER’S MANUAL

Selecting from the Edit Screen This section is for CUSTOM INSTALLER USE ONLY. Touch the button for the setting you’d like to adjust:

Text - Change the label of a device or button. Learn - Transfer IR data from remote to MXW-920i. Erase - Remove learned data. Factory - Installer ONLY. Do not press unless instructed by a custom installer. All data will be lost once the sequence has begun.

Adjusting the Text Select Text from the Edit screen to modify any labels.

Device - Select a device to rename by pressing an adjacent button. Use the arrow and number buttons to add letters. Button - Changes the label of a button within a device. To exit, press Main.

Page 8



MXW-920i OWNER’S MANUAL

Learn commands Transfer commands from a component remote to the MXW-920i using the Learn feature. Device - Copy a command to a device button. Button - Copy a command to a button within a device. To exit, press Main.

Erasing learned data Remove any unwanted learned commands from the remote. Button - Erases a specific command residing on a button within a device. DevBtn - Removes any learned commands on a device button label such as Cable. Device - Erases all learned commands for one device. All - Erases all learned data on the remote. To exit, press Main.

Performing a Factory Default WARNING: DO NOT PROCEED UNLESS SPECIFICED BY YOUR CUSTOM INSTALLER! THIS SECTION WILL ERASE ALL DATA ON THE REMOTE. Pressing Yes will format the remote’s disk and set it back to the factory settings. To exit, press No or Main. Page 9



MXW-920i OWNER’S MANUAL

Battery Installation Open the battery cover by using a Phillips screwdriver to remove each of the four screws. Remove the cover. Observe the + and - polarity indications inside the battery compartment. Place the four AAA batteries into their positions in the battery compartmentobserving the + and polarity indicators on the batteries. Now, replace the battery cover by replacing the 4 screws into their slots.

Specifications Memory: 4 Megabits of Flash Memory (for User Configuration) Devices: Flexible, typically can support up to 40 Devices Pages: Flexible, typically can support up to 40 Pages on each Device Learning Capability: Standard frequencies (15kHz to 460kHz) Macro Capability: Up to 255 steps each, however nesting is allowed IR Range (Line of Sight via Infrared): 30-50 feet, depending on the environment RF Range (radio frequency): 50 to 100 feet, depending upon the environment RF Frequency: 433.92 MHz Weight: 5.68 ounces (without batteries) Size: 8.9” H x 2.34” W x 1.1” D Batteries: 4 AAA Batteries

Page 10



MXW-920i OWNER’S MANUAL

Limited Warranty Statement 1. LIMITED WARRANTY AND DISCLAIMERS Universal Remote Control, Inc. (“URC”) warrants that URC equipment purchased directly from URC or from an authorized URC dealer or distributor shall be free from defects in material and workmanship under normal usage for a period of one (1) year from the date of purchase of the product by the end-user, but no longer than thirty-six (36) months from the date of shipment of the URC equipment by URC to an authorized URC dealer or distributor, except that with respect to Total Control® whole-house products, the warranty extends for two (2) years from the date of purchase by the end-user, but no longer than forty-eight (48) months from the date of shipment of the URC equipment by URC to an authorized URC dealer or distributor. This limited warranty is valid only in the United States of America. URC equipment purchased from other than an authorized URC dealer or distributor is without warranty. URC warrants that the software will substantially conform in any material respect to its functional specifications at the time of delivery. URC SHALL NOT BE LIABLE FOR OPERATIONAL, TECHNICAL OR EDITORIAL ERRORS AND/OR OMISSIONS MADE IN THE URC DOCUMENTATION. URC DOES NOT WARRANT THAT THE URC SOFTWARE IS BUG-FREE OR ERROR FREE OR THAT THERE ARE NO ERRORS/BUGS IN THE URC SOFTWARE. URC warrants that at the time of purchase the URC equipment and the URC software complied with all applicable regulations and policies of the Federal Communications Commission ("FCC") regarding electromagnetic interference caused by electronic/computing devices and to the extent that the URC equipment and/or the URC software fails to so comply, URC shall, at its own expense, take all reasonable measures to promptly cause such to comply. THIS LIMITED WARRANTY DOES NOT COVER TECHNICAL ASSISTANCE FOR HARDWARE OR SOFTWARE USAGE EXCEPT AS EXPRESSLY PROVIDED FOR HEREIN. CERTAIN IMPLIED WARRANTIES, INCLUDING AN IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, MAY BE AVAILABLE WITH RESPECT TO URC EQUIPMENT. IMPLIED WARRANTIES VARY FROM STATE TO STATE. URC EXPRESSLY LIMITS THESE IMPLIED WARRANTIES, TO THE EXTENT ALLOWABLE BY LAW, TO THE TIME PERIODS COVERED BY THE EXPRESS WRITTEN WARRANTIES PROVIDED HEREIN. OTHERWISE AND EXCEPT AS PROVIDED FOR HEREIN, URC EXPRESSLY DISCLAIMS ALL WARRANTIES, EXPRESS, STATUTORY OR IMPLIED, AND MAKES NO REPRESENTATIONS REGARDING THE USE OF, OR THE RESULTS OF THE USE OF, THE EQUIPMENT, SOFTWARE OR DOCUMENTATION IN TERMS OF CORRECTNESS, ACCURACY, RELIABILITY OR OTHERWISE. Page 11



MXW-920i OWNER’S MANUAL

EXCEPT AS EXPRESSLY PROVIDED FOR HEREIN, TECHNICAL SERVICES ARE SUPPLIED "AS IS", WITHOUT ANY WARRANTY, EXPRESS, STATUTORY OR IMPLIED, OF ANY KIND. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, URC EXPRESSLY DISCLAIMS ALL WARRANTIES RELATING TO TECHNICAL SERVICES, EXPRESS, STATUTORY OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF QUALITY OR REASONABLE SKILL AND CARE, OR OUTCOME OR RESULTS. WITHOUT IN ANY WAY LIMITING THE GENERALITY OF THE OTHER PROVISIONS HEREIN, THIS LIMITED WARRANTY DOES NOT COVER: (I) DAMAGE FROM MISUSE, NEGLECT OR ACTS OF NATURE, (II) MODIFICATIONS, (III) INTEGRATION WITH THIRD PARTY CONTENT, OR (IV) BEYOND THE WARRANTY PERIOD AND/ OR FAILURE TO FOLLOW URC WARRANTY CLAIM PROCEDURE. The warranty limitations and warranty disclaimers may not apply to end user in whole or in part, where such are restricted or excluded by applicable law, and such shall apply to the maximum extent permitted by applicable law. In the event of any warranty claim, URC will, at its sole option, repair the URC equipment using new or comparable rebuilt parts, or exchange the URC equipment for new or rebuilt equipment. In the event of a defect, these are the end user's exclusive remedies. All the URC equipment returned for service, exchange or repair require an RGA number. To obtain an RGA number, you must complete a Return Request Form which you may obtain by calling (914) 835-4484 or contacting URC at [email protected] To obtain warranty service, end user must deliver the URC equipment, freight prepaid, in its original packaging or packaging affording adequate protection to URC at 420 Columbus Avenue, Valhalla, NY 10595. It is end user's responsibility to backup any macro programming, artwork, software or other materials that may have been programmed into the unit. It is likely that such data, software, or other materials will be lost during service and URC will not be responsible for any such damage or loss. A dated purchase receipt, bill of sale, installation contract or other verifiable proof of purchase is required. For the URC equipment support and other important information, please visit URC's website available at www.universalremote.com or call the Customer Service Center at (914) 835-4484. This limited warranty only covers the URC equipment issues caused by defects in material or workmanship during ordinary consumer use. It does not cover product issues caused by any other reason, including but not limited to product issues due to commercial use, acts of God, third-party installation, misuse, limitations of technology, or modification of or to any part of the URC equipment. This limited warranty does not cover the URC equipment sold as used, as is, refurbished, so called "B stock" or consumables (such as batteries). This limited warranty is invalid if the factory applied serial number has been altered or removed from the URC equipment. This limited warranty specifically excludes the URC equipment sold by unauthorized resellers. Page 12



MXW-920i OWNER’S MANUAL

With the exception of URC's IR-only, broad-based consumer remotes, none of URC's PC programmable remotes or any of our Total Control® whole-house equipment are authorized for online internet sales. Buying URC's PC programmable remotes or any of our Total Control® whole-house equipment online means buying equipment that does not have URC's limited warranty. Such equipment is not eligible for URC tech support or software support, either. 2. URC'S LIMITATIONS OF LIABILITY IN NO EVENT SHALL URC BE LIABLE FOR INDIRECT, SPECIAL, INCIDENTAL, EXEMPLARY, PUNITIVE OR CONSEQUENTIAL DAMAGES OF ANY KIND OR LOSS OF PROFITS OR BUSINESS OPPORTUNITY, EVEN IF URC IS ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IN NO EVENT SHALL URC BE LIABLE FOR LOSS OF OR DAMAGE TO DATA, COMPUTER SYSTEMS OR COMPUTER PROGRAMS. URC'S LIABILITY, IF ANY, FOR DIRECT DAMAGES OF ANY FORM SHALL BE LIMITED TO ACTUAL DAMAGES, NOT IN EXCESS OF AMOUNTS PAID BY END USER FOR THE URC EQUIPMENT. IN NO EVENT SHALL URC BE LIABLE FOR ANY EVENTS BEYOND ITS CONTROL, INCLUDING ANY INSTANCE OF FORCE MAJEURE. IN NO EVENT SHALL URC BE LIABLE FOR THE ACTS OR OMISSIONS OF END USER OR ANY THIRD PARTY. THE LIMITATIONS OF LIABILITY MAY NOT APPLY TO END USER IN WHOLE OR IN PART, WHERE SUCH ARE RESTRICTED LIMITED OR EXCLUDED BY APPLICABLE LAW AND SUCH SHALL APPLY TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW. URC SHALL NOT BE HELD RESPONSIBLE FOR THE STATEMENTS MADE BY OTHERS. SOME STATES OR JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, OR ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO END USER. THIS LIMITED WARRANTY GIVES END USER SPECIFIC LEGAL RIGHTS AND END USER MAY HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE OR JURISDICTION TO JURISDICTION.

End User Agreement The terms and conditions of the End User Agreement available at www.universalremote.com/eua.php shall apply.

Page 13

MXW-920i OWNER’S MANUAL

Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one more of the following measures:  Reorient or relocate the receiving antenna.  Increase the separation between the equipment and receiver.  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  Consult the dealer or an experienced radio/TV technician for help. Warning! Changes or modifications not expressly approved by the manufacturer could void the user's authority to operate the equipment. Note : The manufacturer is not responsible for any Radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user's authority to operate the equipment. FCC Caution This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the authority to operate equipment. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Federal Communication Commission (FCC) Radiation Exposure Statement The device and the antenna for this device must be installed to ensure a minimum separation distance of 20 cm more from a person’s body. Other operating configurations should be avoided.

Page 14

MXW-920i OWNER’S MANUAL

Regulatory Information to the user  CE conformity Notice Products with “CE” marking comply with the R&TTE Directive 1995/5/EC, EMC Directive 2004/108/EC and Low Voltage Directive 2006/95/EEC issued by the commission of the European Community. 1) R&TTE Directive EMC : ETSI EN 301 489-1,3 RF : ETSI EN 300 220-1,2 : ETSI EN 300 2) EMC Directive Emission : EN 55022 Immunity : EN 55024 Power : EN-61000-3-2, 3  Declaration of Conformity “Hereby, Universal Remote Control Inc. declares that this MXW-920i is in compliance with the Essential requirements and other relevant provisions of Directive 1999/5/EC.”

Certification Type No.(Model No.) Batch/Serial No. Power Rating Frequency band

MXW-920i 6.0V [AAA BATTERY 4EA] 433.92 MHz

Page 15



MXW-920i OWNER’S MANUAL

Declaration of Conformity Company Name

:

Universal Remote Control Inc.

Company Address

:

Contact Information

:

Brand Name

:

500 Mamaroneck Avenue, Harrison, NY 10528, U.S.A www.universalremote.com Phone: (914)835-4484 Fax: (914)835-4532 UNIVERSAL remote control

Product Name

:

RF Remote Controller

Model Name

:

MXW-920i

This product herewith complies with the requirements of EMC Directive (2004/108/EC) and R&TTE Directive(1995/5/EC) issued by the Commission of the European Community Compliance with these directives implies conformity to the following European Community  EMC Directive  EN 55022  EN 55024  EN 61000-3-2  EN 61000-3-3  R&TTE Directive  ETSI EN 301-489-1,3  ETSI EN 300 220-1,2  ETSI EN 300

List of test reports and/or certificate verified compliance with the standards above  EMC Directive   Report No.  Testing Laboratory

: Gumi College EMC Center

 R&TTE Directive  Certificate No.  Certificate Body

: SIEMIC (No. 2200)

Date of issue

:

Name and signature of authorized person

:

Page 16



March 16, 2012

James Novak Senior Product Manager Universal Remote Control Inc.

NOTE

Page 17



NOTE

Page 18



NOTE

Page 19



NOTE

Page 20



500 Mamaroneck Avenue, Harrison, NY 10528 Phone: (914) 835-4484 Fax: (914) 835-4532

www.universalremote.com OCE-0050D Rev 03_RH


Similar documents