GIGAMEDIA GGM GS16P User Manual

Poe & optical transmission 16-ports gigabit poe switch

USER GUIDE PoE & optical transmission

16-ports Gigabit PoE switch (GGM GS16P)

UK

GIGAMEDIA - 16 ports Gigabit PoE Switch

Statement Copyright @ 2002-2013 our company. All Rights Reserved. No part of this document may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise without the prior written permission of our company. All other trademarks mentioned in this document are owned by their respective owners. The information and product specifications within this document are subject to change at any time, without notice and without obligation to notify any person of such change. For reference only, assumes no responsibility for the statement and information from this document.

Packing list Please kindly check the following items: • 1x PoE switch • 1x Power cable • 1x Mounting kits • 1x User Guide / Certificates / Warranty card

Note If any shortage or damage found, please contact us in time.

GIGAMEDIA - www.gigamedia.net

GIGAMEDIA - 16 ports Gigabit PoE Switch

Product overview Product introduction The full Gigabit Ethernet PoE switch can provide seamless connection for 10/100/1000M Ethernet network and equipped with PoE function, can be used as Ethernet power supply device (PSE). It can automatically identify the connected devices whether compatible with IEEE 802.3af or IEEE 802.3at standards, and then supply power for them. The Gigabit PoE switch makes it easier to deploy wireless access point (AP) and IP-based terminal network equipment with PoE technology. PoE Technology is Power over Ethernet technology. It is refering to transfer both Ethenet data and and DC Power at the same time for IP Phone, Wilress AP, IP-based camera. These devices which receive DC power is called Powered Device (PD).

Note The product «Switch» mentioned in the manual, if without a special request, it is refering to 10/100/1000M PoE switch, PoE switch in short in below. Feature • IEEE 802.3 10BASE-T Ethernet, IEEE 802.3u 100BASE-TX Fast Ethernet, IEEE 802.3ab 1000BASE-T Gigabit Ethernet, ANSI/IEEE Std 802.3 Nway auto-sensing, IEEE 802.3x flow control; • Provides 10/100/1000M self-sensing RJ45 port with PoE power function; • All the ports support Auto MDI/ MDIX (Auto MDI/MDIX); • The power of single PoE port can be up to 15.4 W (af) / 30 W (at); • Supply power to the devices compatible with IEEE802.3af/IEEE802.3at; • Support IEEE802.3x full duplex flow control and duplex backpressure flow control; • Automatic MAC address learning and updating; • 8K MAC address database; • 52Gbps backplane bandwidth; • High performance full load power configuration; • Support the store-and-forward very large database switching mode and direct forwarding mode.

GIGAMEDIA - www.gigamedia.net

UK

UK

GIGAMEDIA - 16 ports Gigabit PoE Switch

Technical structure and port description

275 mm 44.5 mm

PoE

100/1000M

G17

16G+2G SFP PORT POE GIGABIT SWITCH

G18

100/1000M

10/100/1000M POE GIGABIT SWITCH

440 mm A

PoE

100/1000M

G17

16G+2G SFP PORT POE GIGABIT SWITCH

G18

100/1000M

10/100/1000M POE GIGABIT SWITCH

B

C

D

ACIN 100-240V

A. Working status light B. 16x Gigabit PoE ports C. SFP fiber port D. AC 100-240 V, 50/60 Hz input port

GIGAMEDIA - www.gigamedia.net

GIGAMEDIA - 16 ports Gigabit PoE Switch

Indicator description Indicator Power LED: PWR

PoE Working LED: PoE

Link/ACT LED

SFP LED

Status

Description

Yellow LED ON

Normal power supply

OFF

Power OFF

Green LED ON

Connected the pd device, working normally

Green LED Blink

Short circuit or current overload

OFF

Not connected the pd device or power OFF

Green LED ON

Data transmission normally

Green LED Blink

Connected normally and working normally

OFF

Not connected

Green LED ON

Data transmission normally

Green LED Blink

Connected normally and working normally

OFF

Not connected

Note: Please confirm that the PD devices are complying with IEEE802.3af/at standard. POWER PORT: Gigabit switch series products comes with built-in power, no power adapter, AC 100~240 V, 50/60 Hz PoE PORT: PoE port with PoE function, which can transmit data and power simultaneously if connected matching device. The LED lights on the front panel can show working status of each port. Ethernet PORT: Beside PoE port, other ports are Ethernet RJ45 port, and all RJ45 port support Auto MDIMDIX, plug and play. The LED lights on the front panel can show working status of each port.

GIGAMEDIA - www.gigamedia.net

UK

UK

GIGAMEDIA - 16 ports Gigabit PoE Switch

Installation guide Please install with the matched devices. Installation Please confirm the following things before installation: 1. If the POE port power meets the power requirement of the connecting devices. 2. If the POE standard requirement and power supply matches with the power receiving device [1/2+, 3/6-(End-span) / 4/5+, 7/8-(Mid-span)]. 3. If the output power of the matched power adapter is compatible with the specification in the label of the POE switch. Please install the POE switch according to the following steps: 1. Put the PoE switch on the surface of a large and stable table. 2. Connect the power outlet through the power cable. 3. Connect the network devices to the POE switch port though network cable. Note 1. Please do not put heavy products on the POE switch, and please ensure good ventilation environment for the POE switch. 2. Please cut off the power first before plugging the power adapter. Power Connect the power cable, plug it into power socket, turn on the power, then the switch will automatically initialize, and LED lights status will display as following: 1. Except the POE port lights, all the other lights will go through the process of «on-off-on-off», which means the restoration is successful. 2. Power LED remains lit. Note: If initialization is inconsistent with the above, please check the power.

GIGAMEDIA - www.gigamedia.net

GIGAMEDIA - 16 ports Gigabit PoE Switch

Connection diagram

Po

E

PoE switch

Power Monitor Fiber media converter

CAT5 cable

NVR CAT5 cable

PoE IP camera

GIGAMEDIA - www.gigamedia.net

Video line

UK

UK

GIGAMEDIA - 16 ports Gigabit PoE Switch

Products model & description GGM GS16P: 16-Port 10/100/1000M PoE switch + 2 empty SFP slots. Transmission distance is 100 m,1-16 port support PoE, IEEE 802.3af, single port power is 15.4 W, the total power is 250 W, built-in power. Connect to power The Gigabit PoE switch uses AC 100~240 V, 50/60 Hz power supply 1. Please check if the power supply specification matches with the required; 2. Connect the power cable to AC power socket, shown as in the following pictures;

L Angle Iron Screw

10 / 100

Power

Over

/ 1000 Ethernat

M PoE Switch Gigabit

100M

PoE Switch

LINK

PoE

PWR 1000M

1

Power Supply Installation Display

Hangers Installation Display

2

3

4

5

6

7

8

Rack Installation Display

After installation, please check: If there is enough space for heat sink; if the power socket is suitable for switch specification; if the power, switch and rack are properly grounded and if the connection between switch and other network equipments are normal.

GIGAMEDIA - www.gigamedia.net