Belkin OmniView SOHO KVM Quick Installation Manual

* The preview only show first 10 pages of manuals. Please download to view the full documents.

Loading preview... Please wait.

Manuals information


Report / DMCA this file

Description

Switch with audio vga with usb console and host support

Manuals Content

Single-Switch Installation

Audio and Microphone Connections

Powering Up the Systems

This section provides complete instructions for the hardware setup of a single KVM Switch. (F1DS102L or F1DS104L)

NOTE: Speakers and microphones are not required for use of your KVM Switch.

Once all cables have been connected, power up the KVM Switch followed by the CPUs that are attached to the KVM Switch. All computers can be powered on simultaneously. The KVM Switch emulates a mouse and keyboard on each port and allows your computer to boot normally. Your KVM Switch should now be ready for use.

Installing the KVM Switch

The KVM Switch is a plug-and-play device for installation. For a quick start on installation and operation, please follow the instructions below for the setup sequence:

Step 1.

Connect the shared keyboard, monitor, and mouse (also speaker set and microphone) to the console port of the KVM Switch.

Connect the Audio

Step 1.

Using the audio cable attached to your speakers, connect the male 3.5mm plug to the lime audio jack in the “Console” section of the KVM Switch.

Step 2. Step 2.

Connect each of your computers to the KVM Switch, using the USB KVM cable, and audio and mic cables.

Step 3.

Power up your KVM Switch by connecting the external power adapter to it.

Using the mic cable attached to your microphone, connect the male 3.5mm plug to the pink mic jack in the “Console” section of the KVM Switch.

Step 3.

Using the SOHO USB Cable Kit, connect one end of the lime male 3.5mm plug to the speaker jack of your sound card or computer, and connect the other end to the audio jack of the KVM Switch.

Step 4.

Power up the connected computers one by one. After your computers are powered up, the keyboard and mouse will be recognized and now you can begin operating the KVM Switch. NOTE: Since the USB interface is hot-pluggable, you don’t have to turn off the computer before making connections to the KVM Switch.



Step 4.

Using the KVM Cable, connect one end of the pink male 3.5mm plug to the mic jack of your sound card or computer, and connect the other end to the pink mic jack of the KVM Switch.

OmniView® SOHO KVM Switch with Audio

OmniView® SOHO KVM Switch with Audio

VGA with USB Console and Host Support

VGA with USB Console and Host Support

Front View

KVM Soho VGA U-type 4 Port Enclosure KVM Switch Print Graphics v.2.1 F1DS102L, F1DS104L

USB Hub Port 1

front panel

Audio/Mic Switch

Belkin Tech Support US: 800-223-5546 ext. 2263 310-898-1100 ext. 2263 UK: 0845 607 77 87 Australia: 1800 235 546 New Zealand: 0800 235 546 Singapore: 65 64857620 Europe: www.belkin.com/support

M Soho VGA U-type 4 Port Enclosure Graphics v.2.1 F1DS102L, F1DS104L back panel

Back View 4th Computer Port

Indicators KVM Soho DVIPort 4 Port Enclosurefront panel Print Graphics v.2.1 F1DD102L, F1DD104L

3rd Computer 2nd Computer 1st Computer Port Port Port

Belkin International, Inc. 501 West Walnut Street Los Angeles, CA 90220, USA 310-898-1100 310-898-1111 fax

VGA Console Port

Start Here

Belkin Ltd. 4 Pioneer Avenue Tuggerah Business Park Tuggerah, NSW 2259, Australia +61 (0) 2 4350 4600 +61 (0) 2 4350 4700 fax Belkin B.V. Boeing Avenue 333 1119 PH Schiphol-Rijk, The Netherlands +31 (0) 20 654 7300 +31 (0) 20 654 7349 fax

Belkin Ltd. Express Business Park, Shipton Way Rushden, NN10 6GL, United Kingdom +44 (0) 1933 35 2000 +44 (0) 1933 31 2000 fax © 2008 Belkin International, Inc. All rights reserved. All trade names are registered trademarks of respective manufacturers listed.

Additional Computer Audio/Mic Jacks

back panel

front panel

DC Power Jack

M Soho DVI 4 Port Enclosure Graphics v.2.1 F1DD102L, F1DD104L

1st Computer Audio/Mic Console Jacks

USB Hub Port 2 Audio/Mic Console Jacks

USB Console Port

back panel

PM00510 KVM Soho VGA T-type 4 Port Enclosure front panel Print Graphics v.2.1 F1DS102J, F1DS104J

front panel back panel

M Soho VGA T-type 4 Port Enclosure t Graphics v.2.1 F1DS102J, F1DS104J back panel

front panel

back panel



Quick Installation Guide

F1DS102L F1DS104L

Similar documents