Lee & Plumpton Planar Bench Assembly Instructions

* The preview only show first 10 pages of manuals. Please download to view the full documents.

Loading preview... Please wait.

Manuals information


Report / DMCA this file

Description

1600mm and 1800mm wide

Manuals Content

www.leeandplumpton.co.uk

ASSEMBLY INSTRUCTIONS RANGE

Planar Bench

REF:

1600mm and 1800mm Wide

1600mm Read this leaflet before assembly

1800mm

2 People Required

COMPONENT PARTS

Item 1 Top Panel Qty 1

Item 3 Side Panel Qty 2

Item 2 Modesty Panel Qty 2

Item 4 Wood Dowels F.0431 Qty 4

Item 5 Minifix Bolt Chipfast 34x11mm F.0532 Qty 14

Item 9 F.0551 Foot Qty 4

Item 10 Angle Bracket Qty 4

Item 6 F.0414 5/8” x 8g Pan Pozi BZP Qty 32

Item 7 F.0434 Minifix Alloy Cams 18mm Qty 10

Item 8 F.0467 Minifix Alloy Cams 25mm Qty 4

No. 134 A/2257 Revision A 17/01/2020

1

TOOLS REQUIRED

BEFORE YOU BEGIN...

• Short Pozi head screwdriver

• • • • •

Check you have all the tools and components required Keep children and animals away from small parts Ensure you have adequate space Assemble product on a flat, clean surface Apply manual handling guidelines when building this item

ASSEMBLY INSTRUCTIONS STEP 1 Lay both the Modesty Panels (2) flat on a soft surface with the holes facing upwards.

2

Ensure all holes are free of debris. Insert the appropriate number of Cams (7) into the Panels.

7

Ensure that the arrows moulded into the Cams are pointing towards the edge of the Panel (where the joining hole is).

STEP 2 Attach the Angle Brackets (10) to the Modesty Panels, using 4 Screws (6) per Bracket. 10

6

STEP 3 Lay both the Side Panels (3) flat on a soft surface with the holes facing upwards. Ensure all holes are free of debris. Insert the appropriate number of Cams (8) and Rapid Dowels (5) into the Panels.

8 5

3

Ensure that the arrows moulded into the Cams are pointing towards the edge of the Panel. No. 134 A/2257 Revision A 17/01/2020

2

ASSEMBLY INSTRUCTIONS STEP 4 Place the Side Panels (3) into position onto the Modesty (2) Panels. Lock the Cams (7) with a half turn.

2 3

STEP 5

3

Attach the Angle Brackets (10) to the Side Panels (3), using 4 Screws (6) per Bracket.

6

10

STEP 6 Lay the Top Panel (1) flat on a soft surface with the holes facing upwards. Ensure all holes are free of debris. Insert the appropriate number of Rapid dowels (5) and wooden dowels (4) into the Top Panel.

5 1 4

No. 134 A/2257 Revision A 17/01/2020

3

ASSEMBLY INSTRUCTIONS 3

STEP 7 Place Sides (3) and Modesty Panels (2) into position on the Top Panel (1).

2

Lock the Cams with a half turn.

1

STEP 8 Attach the Feet (9) by screwing them into the insert in the Side Panels. 9

STEP 9 Carefully stand the bench upright. The bench can be levelled by adjusting the height of the Feet (9). 9

CARE AND MAINTENANCE Clean using a damp cloth and mild detergent – do not use abrasive cleaners or bleach. No. 134 A/2257 Revision A 17/01/2020

4

Similar documents